Skip to content
Work with Shashwat
Menu
ICP Intelligence

TAM SAM SOM Calculator

Free bottom up TAM SAM SOM calculator for B2B

For founders and CMOs preparing a board or investor deck. The decision: how big is our market, counted bottom up?

How big is our market, counted bottom up? Enter how many companies could buy and your annual contract value, then your ICP match rate and year one share if you have them. The calculator shows TAM, SAM and SOM with every multiplication written out, and labels any rate you left out as an example.

Try it with an exampleUse your own details

TAM, SAM and SOMTAM, SAM and SOM: TAM $216.0M, inside SAM $64.8M, inside SOM $1.9M. Not to scale.TAM, SAM and SOMTAM $216.0MSAM $64.8MSOM $1.9MNot to scale

Can our B2B market support our revenue target using bottom-up TAM, SAM, and SOM?

Test whether your market supports your revenue target with the bottom-up formula: multiply total potential companies by average contract value for TAM, multiply TAM by your ICP match rate for SAM (default example 30%), and multiply SAM by your Year 1 market share target for SOM (default example 3%), then check deals needed, monthly target, and required pipeline in TAM/SAM/SOM Calculator.

What you get

This sample is a made-up example, built from the inputs behind Fill in an example. It shows one section of the answer.

Investor-Ready Summary

The indian mid-size companies with an ERP segment represents a $216.0M TAM with $64.8M SAM of companies matching our ICP.
At the example Year 1 share of 3.0%, the calculation gives $1.9M SOM, requiring 81 customers at $24K ACV.
This scenario does not establish attainable market share. Figures calculated from your inputs, plus the preset rates marked as examples above.

See the full example answer or run it with your own details.

Run TAM SAM SOM Calculator

You need: Total potential companies, Average contract value. You can add: ICP percentage, Year 1 market share target, Data sources, Segment name.

Estimated total companies that could buy (from LinkedIn, industry reports)

Your average ACV in dollars

Percentage that match your ICP (1-100)

Realistic Year 1 market share percentage (typically 1-5%)

Where you got your numbers (for documentation)

Name of the market segment

Optional: what you sell (for example "spend management software"), used for sector notes. The arithmetic does not use it

Optional: your company or product name, so the answer can name it

Worked example: Darwinbox (illustrative inputs)

About this example. Darwinbox is a real company. It has not reviewed this page, and Helix GTM Consulting has no relationship with it. Darwinbox sells an HR platform covering recruiting, onboarding, payroll and employee administration (TechCrunch, 5 March 2025). Every input below is illustrative, written by Helix to show how the tool works. None of it is Darwinbox's data, and the output is an exercise result, not Darwinbox's strategy.

We ran TAM SAM SOM Calculator on 19 November 2026 through the ICP Intelligence MCP endpoint (server version 1.2.28); the excerpt is cut word for word from its answer.

Show the inputs
  • Company: Darwinbox
  • Product category: HR software (HCM)
  • Total potential companies: 4,000
  • Average contract value: 120,000
  • Icp percentage: 25
  • Year1 market share target: 1
  • Segment name: employers with 2,000 or more staff in India, Southeast Asia and the Middle East
  • Data sources: illustrative count written for this example; not a Darwinbox or market figure

Exercise output from illustrative inputs. It is not Darwinbox's data, result or strategy.

Investor-Ready Summary

The employers with 2,000 or more staff in India, Southeast Asia and the Middle East segment represents a $480.0M TAM with $120.0M SAM of companies matching our ICP.
At our assumed Year 1 share of 1.0%, the calculation gives $1.2M SOM, requiring 10 customers at $120K ACV.
This scenario does not establish attainable market share. Figures calculated from your inputs. Data sources you named: illustrative count written for this example; not a Darwinbox or market figure.

Run it with your own details

Example answer

Generated on 12 November 2026 from this branch, with the inputs behind Fill in an example. Your own inputs give a different result.

ICP Intelligence report

Example: TAM SAM SOM Calculator

Made with TAM SAM SOM Calculator by Helix GTM ConsultingBased on the made-up example inputshttps://gtmhelix.com/tools/icp-intelligence/tam-sam-som-calculator/

Show the full result

TAM/SAM/SOM Analysis

Market: Indian mid-size companies with an ERP
  • Company: a spend management software company in India

Sector: read from your inputs as fintech, spend and expense. Business model: not stated. Tell us how you charge and the plan will adjust.


Input Data
InputValueSource
Total Potential Companies9,000Your input
Average Contract Value$24,000Your input
ICP Match Rate30% (Example figure: replace with your own)Not supplied
Year 1 Market Share Target3.0% (Example figure: replace with your own)Not supplied

Market Sizing Results
TAM (Total Addressable Market)
TAM = Total Potential Companies × ACV
TAM = 9,000 × $24,000
TAM = $216.0M

Everyone who could theoretically buy your product


SAM (Serviceable Addressable Market)
SAM = TAM × ICP Match Rate
SAM = $216.0M × 30% (Example figure: replace with your own)
SAM = $64.8M (Example figure: replace with your own)

Companies that match your ICP and you can actually serve


SOM (Serviceable Obtainable Market)
SOM = SAM × Year 1 Market Share
SOM = $64.8M × 3.0% (Example figure: replace with your own)
SOM = $1.9M (Example figure: replace with your own)

This uses an example Year 1 share (3.0% of SAM) because you did not supply one. The calculation does not establish that this revenue or share is attainable.


Visualization

Values computed with a preset rate you did not supply are examples.
Example figures: replace with your own.

┌─────────────────────────────────────────────────────────┐
│                         TAM                             │
│                    $216.0M                              │
│    ┌───────────────────────────────────────────┐        │
│    │                  SAM                      │        │
│    │             $64.8M                        │        │
│    │    ┌─────────────────────────┐            │        │
│    │    │          SOM            │            │        │
│    │    │       $1.9M             │            │        │
│    │    └─────────────────────────┘            │        │
│    └───────────────────────────────────────────┘        │
└─────────────────────────────────────────────────────────┘

What This Means for Your Business
Year 1 assumed share scenario
  • Revenue at the assumed share: $1.9M (Example figure: replace with your own)
  • Deals Needed: ~81 closed customers (Example figure: replace with your own)
  • Monthly Target: ~7 deals/month (Example figure: replace with your own)
  • Pipeline Required: $5.8M (SOM × 3, a 1 in 3 win rate) (Example figure: replace with your own)
Growth Path

Later years assume your market share doubles each year.

YearMarket ShareRevenue TargetCustomers
Year 13.0% (Example figure: replace with your own)$1.9M81
Year 26.0% (Example figure: replace with your own)$3.9M162
Year 312.0% (Example figure: replace with your own)$7.8M324

Assumptions & Validation
Key Assumptions
  1. Company count accuracy: Validate against dated company records and industry reports you can inspect. Which software fits your case is a judgement call. Ask Shashwat: book 45 minutes at https://calendly.com/shashwat-gtmhelix/45min
  2. ACV: $24,000, your input, read as annual contract value; check it against your last closed deals in this segment
  3. ICP match rate: Not supplied, so a preset example is used; refine with actual data
  4. Market share: 3.0% (Example figure: replace with your own) of SAM in Year 1 means ~81 new customers; check that number against the deals your team closed last year
Data Validation Checklist
  • [ ] Cross-reference company count with 2+ sources
  • [ ] Validate ACV with recent closed deals
  • [ ] Confirm ICP percentage with customer analysis
  • [ ] Review market share against competitor data
How to Get Better Data
  1. Company records already available to you: Apply the ICP filters and record the count, source and date. Which software fits your case is a judgement call. Ask Shashwat: book 45 minutes at https://calendly.com/shashwat-gtmhelix/45min
  2. Industry Reports: Market sizing from industry analyst reports
  3. Competitor Analysis: Estimate competitor customer counts
  4. Customer Interviews: Ask about market perception

Investor-Ready Summary
The indian mid-size companies with an ERP segment represents a $216.0M TAM with $64.8M SAM of companies matching our ICP.
At the example Year 1 share of 3.0%, the calculation gives $1.9M SOM, requiring 81 customers at $24K ACV.
This scenario does not establish attainable market share. Figures calculated from your inputs, plus the preset rates marked as examples above.
Sector notes: fintech, spend and expense
  • Who usually decides: The CFO signs; the Finance Controller or the head of the affected finance team champions; internal audit and compliance review controls; IT checks ERP integration and security; HR joins when employees are affected.
  • Roles that usually buy and use it: Chief Financial Officer, Finance Controller, Head of Accounts Payable, Head of Treasury, Internal Audit Lead, Compliance Officer, Head of IT.
  • What this sector measures: days to close the books, reconciliation effort, policy breach rate, approval cycle time, audit findings, cost per transaction, payment success rate.
  • Words this sector's buyers use: reconciliation, month end close, policy controls, audit trail, accounts payable, ERP posting, compliance review, approval workflow, data residency.
  • A proof point that lands: Close time or reconciliation effort before and after for one entity, signed off by the finance controller.
  • Counting companies in this sector: count only companies where the roles above exist and the problem is measured (days to close the books and reconciliation effort).

Next Step: Use Lookalike Signal Generator to create targeting criteria

Reading the answer

For a spend management software company in India: The revenue scenario for Indian mid-size companies with an ERP uses 9,000 accounts and an annual price of USD 24,000, then applies the displayed fit and share assumptions. It is not evidence that those accounts will buy. Evidence that could change this conclusion: a dated and deduplicated account count, observed annual prices, a checked fit sample and capacity to win and serve the assumed share.

Decisions by role

Proposed owners. Confirm the named person before acting.

Founder: For a spend management software company in India, verify the source and date behind the 9,000 accounts in Indian mid-size companies with an ERP before accepting the market boundary; remove duplicate or ineligible accounts.

CEO: For a spend management software company in India, ask sales and delivery to compare the customer requirement at the displayed share assumption with their actual capacity before funding the scenario; record the shortfall or support.

CMO: For a spend management software company in India, label the the displayed fit assumption and the displayed share assumption as assumptions in any market claim before publishing it; retain the account source and limits beside the revenue figure.

CRO: For a spend management software company in India, compare the USD 24,000 annual price with closed deals in Indian mid-size companies with an ERP before adopting a revenue target; confirm the period and scope match.

Demand generation head: For a spend management software company in India, review a separate sample from the 9,000 listed accounts against the criteria behind the displayed fit assumption before building outreach; record exclusions and the resulting fit rate.

Region context: Which region applies: India, Southeast Asia, Middle East, UK, Western Europe or North America? Add it to your description and rerun.

Built by Shashwat Ghoshhttps://gtmhelix.com/tools/icp-intelligence/tam-sam-som-calculator/

From this page's example inputs: 9,000 companies at $24,000 a year; the 30% ICP match and 3% year 1 share are the tool's example figures. Building an annual revenue plan with your leadership team? Open the B2B Market Sizing Lab to compare how your Founder, CEO, CMO, CRO and Demand generation head size reachable revenue against your target.

When a tool is not enough: if the decision needs more than one answer, talk it through in a call. Book 45 minutes with Shashwat.

How to read the answer

The calculator multiplies your Total potential companies by your Average contract value in dollars to get TAM, multiplies TAM by your ICP percentage to get SAM, and multiplies SAM by your Year 1 market share target to get SOM and the number of Year 1 customers needed. If you leave ICP percentage or Year 1 market share target blank, the tool uses labelled example presets (30% ICP match and 3.0% Year 1 share) and warns you that the scenario does not establish attainable market share. Check What This Means for Your Business for the implied monthly deal pace and required pipeline (SOM × 3 at a 1-in-3 win rate).

What to do next

  • Founder: Replace any preset 30% ICP match rate or 3.0% Year 1 market share with your own measured percentages and cross-reference your total company count across two dated sources.
  • CEO: Compare the Deals Needed and Monthly Target under What This Means for Your Business against the number of deals your team actually closed last year before putting the Investor-Ready Summary into a board or fundraising deck.
  • CMO: Validate the ICP percentage against your CRM account analysis so SAM reflects companies that genuinely have the problem and budget you serve.
  • CRO: Check whether your sales team has the rep capacity and win rate to generate and close the Pipeline Required (SOM × 3) at your stated average contract value.
  • Demand generation head: Take the validated SAM segment definition into the Lookalike Signal Generator to build your reachable account and lead lists for Year 1.

Why come back

Come back whenever your average contract value shifts, you verify a sharper account count from dated industry records, or you need a separate bottom-up sizing for a new market segment or geography. The tool applies the same fixed rules every time. It does not call an AI model, and this site does not keep what you enter.

Questions about TAM SAM SOM Calculator

What is the difference between TAM, SAM and SOM?

TAM is every company that could buy, times your annual contract value. SAM is the share of those that match your ICP. SOM is the share of SAM you assume you can win in year one. In the worked example: 4,000 companies at $120,000 is a $480.0M TAM, 25% of that is a $120.0M SAM, and 1% of SAM is a $1.2M SOM.

What if I do not know my ICP match rate or year one share?

Leave them out and the calculator uses 30% and 3% as labelled examples. Replace them with your own figures before you show the numbers to anyone.

Does a SOM figure prove we can win that share?

No. The answer says the year one share is a planning assumption and that the calculation does not establish attainable share. Back it with win rates and sales capacity before it goes in an investor deck.

Where do the company counts come from?

From you. It is a calculator, not a data source. Record where your count came from in the data sources field, and the summary names it.

How do I calculate TAM bottom up?

Count the companies that could buy, multiply by the contract value you really win, then narrow to the share that fits your ICP and the share you can win in year 1. That is TAM, then SAM, then SOM.

Helix does not rank vendors or name software to buy for market sizing. Run this free calculator for a first number, check the company count against two dated sources and the contract value against your last closed deals, or book 45 minutes.

Run the free tool or book 45 minutes with Shashwat.

Who is the TAM SAM SOM Calculator tool not ideal for?

  • Anyone who cannot give the inputs listed above, because the answer is built only from them.
  • Teams looking for a list of companies to target: the tools describe and score profiles from your data, but they do not find companies.
  • Teams that want market sizing without their own numbers: TAM, SAM and SOM are built from the figures you enter, and an ICP match rate or market share you leave out is filled with a labelled example (30% and 3%).

How do I use the TAM SAM SOM Calculator tool with an AI assistant?

Add ICP Intelligence once (see Use it in Claude, ChatGPT or Gemini), then ask in plain words. Here is a prompt built from the tested example:

My role is not stated. Ask me for my role first. Use ICP Intelligence's TAM SAM SOM Calculator tool. total potential companies: 9000; average contract value: 24000; segment name: Indian mid-size companies with an ERP. If this tool is unavailable, ask me to open its web page; do not invent its output. In Gemini CLI or Antigravity, use the Helix GTM Suite skills package for related guidance, without claiming to run this connector.

How does the TAM SAM SOM Calculator tool work?

You do not need to sign in. A web browser is enough, and the answer comes back in a second or two.

  1. Fill in the form above, or press Fill in an example.
  2. Press Run TAM SAM SOM Calculator.
  3. Read the result on this page, then copy it and edit it before you use it.

It applies fixed rules in the ICP Intelligence code to the inputs above and returns text. It does not call an AI model, does not look anything up, and does not store what you type. The web form and the AI assistant connector run the same tool code, so the same input gives the same answer in both.

Previous: Buyer Group AnalyzerNext: Lookalike Signal Generator

More ICP Intelligence tools

ICP Intelligence home · All Helix GTM tools · Tools by GTM job

For developers

MCP tool name: tam_sam_som_calculator. REST: POST https://icp-intelligence.gtmhelix.com/api/tools/tam_sam_som_calculator with this JSON body (see How it works):

{
  "input": {
    "total_potential_companies": 9000,
    "average_contract_value": 24000,
    "segment_name": "Indian mid-size companies with an ERP"
  }
}

Choose your app

Run a Helix tool in your browser, then take the result to ChatGPT, Claude or Gemini. Connectors work with supported plans in Claude, ChatGPT, Cursor, VS Code and Windsurf. The Helix GTM Suite skills package supports Claude Code, Gemini CLI, Antigravity, Cursor and VS Code, and is available through skills.sh. Each plugin has its own installation steps, below or on its own page.

Prefer a guided room you can share with your team? Open the Market Sizing Lab on ChatGPT Sites or the Positioning Workshop on ChatGPT Sites.

Connector setup guides · Skills package setup guide · Find the skills on skills.sh